Natwerk Designs

sir,is it possible to design 2 phase or 3 phase light in any feilds like industrial or lighting mast. please?

i came to know from my friends ,it is possible to design three phase or two phase light for industrial or lighting mast for any purpose.but,i could not believe this one . anyhow,is it possible .please clarify this doubt

Public Comments

1. I think you mean a lighting system powered by a 3 phase electrical system? Certainly possible. Just use 120 volts 3 phase power system and connect 120 VAC bulbs from each phase to neutral. .
2. The design of the mast and lighting system is one thing. The manner of the electrical feed for the fixtures is another. Both 2 phase or three phase feed is possible depending on the number, power, voltage, and control of the fixtures. Any single light will be single phase, (line to line or line to neutral.), but the control and distribution systems can be multi-phase. if you've got a lot of power to transmit over a long distance to the mast, three phase would be favored. If a more moderate load and distance, two phase three wire, (or two wire at a lower voltage), might be chosen.