Natwerk Designs

Whats The Best Mono Amp For My 2 12'' 600 Watt Kenwood Tornados?

Hifonics BXi606 1-Channel Car Audio Amplifier Monoblock Class A/B Amplifier with Bass Level Control RMS Power Ratings: 1 ohm: 600 watts x 1 channel 2 ohms: 300 watts x 1 channel 4 ohms: 150 watts x 1 channel Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps Hifonics Blue Illuminated Logo Maxxsonics Illuminated "M" End Panel Logo Heavy-Duty Ultra-Fi" MOSFETS Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output Fully Adjustable Accu-Cross" Crossovers ±18dB Variable Bass Equalization @ 45Hz 180° Variable Phase Control (15 to 35Hz) Dash-Mountable Bass Remote Control Included Variable 24dB Subsonic Filter Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply) Twin-Turbo Torroid Coil Design HSMD Hifonics Surface Mount Design Balance Line Inputs for our 18-Volt Line Drivers RCA Line Output for Amplifier Daisy Chaining Gold 4-Gauge Power Connectors Dimensions: 9.84"L x 10.39"W x 2.63"H 1-year Techronics.com warranty MTX Audio TA2301 Thunder 2301 300W RMS, Class D Monoblock Amplifier Thunder2301 Product DescriptionThunder TA Series Class D Monoblock Car Amplifier RMS Power Rating: 4 ohms: 150 watts x 1 chan. 2 ohms: 300 watts x 1 chan. Max power output: 300 watts x 1 chan. MOSFET power supply Wired remote bass level control included Thermal and short LED indicators Tuned Bass EQ (0-12 dB bass boost at 40 Hz) Adaptive Class D Technology: With MTX innovative approach, the amplifier’s switching energy is constantly changing and is moved away from FM radio frequency ranges as the amplifier’s load and output increases. Thermal and short protection StreetWires Connectors Xtant Technologies Cooling (XTC) thermal-regulated, turbo-charged intercooler Variable low-pass filter (at 80 or 120 Hz, 24 dB/octave) CEA-2006 compliant amplifier Dimensions: 12-11/16"L x 9-5/8"W x 2-1/2"H 4 or 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together. 1-year Sonic Electronix warranty Amplifier Specifications: Amplifier Class D Number of Channels 1 - Mono RMS Power (4 ohms) 150 watts x 1 channel RMS Power (2 ohms) 300 watts x 1 channel RMS Power (1 ohm) Not Stable Bridged RMS Power N/A Peak Power Output N/A Minimum Impedance Unbridged 2 ohms Minimum Impedance Bridged Not Bridgeable ohms THD at Rated RMS Power .5% Speaker Level Inputs No Preamp Outputs Yes - 1 pair Built-in Crossover Low-pass (LP) High-Pass Crossover Frequency N/A Low-Pass Crossover Frequency 80 Subsonic Filter N/A Signal-to-Noise Ratio 73 dB Channel Separation N/A Bass Boost 0 - 12 dB Bass/Gain Remote Yes Fan Cooled Yes Fuse Rating 20A x 2 2000W Pyle Dryver PLAD413 4 Ch High Power MOSFET AmpBrand New Pyle Dryver PLAD413 2000 Watt 4 Channel High Power MOSFET Amplifier 4x 200W RMS at 4 Ohms 4x 500W MAX at 4 Ohms 2x 800W MAX at 4 Ohms Bridged 4x 350W RMS at 2 Ohms Electronic Crossover Network Bass Boost Circuit Bridgeable at 4 Ohms 2 Ohm Stereo Stable Tri-Mode Capable Gold Plated RCA Inputs Line Outs for 1 and 2 Channel Low Pass Filter Control High Pass Filter Control Remote Bass Level Control Power and Protection LED Indicators Red Lighting Illumination Side Leg Mounting THD: <0.04%. S/N Ratio: >90dB Input Sensitivity : 100mV ~4V Channel Separation : >65dB Freq. Response : 10Hz ~ 30KHz Patent Pending Soft Turn-on/Turn-off Dimensions : 8.6''(W) x 2.74''(H) x 12.6''(L) Item Manual: PLAD413 Click Here

Public Comments

1. alot of people would say the MTX one only due to being CEA..personallly i still would not use thier amps if given to me.....tech support, HA...Company policys HAHA, support to dealers HAHAHA.... or maybe that was just the Canadian distribution ....